Hakko Soldering Equipment
Quality Soldering Equipment
|
Static-free design - ESD Safe. Powerful thermal recovery allows soldering at lower tip temperatures making the Hakko FX-951 an effective solution for lead-free soldering. Tips are ordered separately so that you can select tips to match your soldering requirements. Tip profiles & ordering. |
| Order Code | ex GST | |
|---|---|---|
| FX951 Single Soldering Station (no tip) | A$ 429.00 |
|
Static-free design - ESD Safe. Dual soldering station saves bench space. Powerful thermal recovery allows soldering at lower tip temperatures making the Hakko FX-952 an effective solution for lead-free soldering. Tips are ordered separately so that you can select tips to match your soldering requirements. Tip profiles & ordering. |
| Order Code | ex GST | |
|---|---|---|
| FX952 Dual Soldering Station (no tips) | A$ 806.00 |
|
The 'FUTURE MODULE' FM-202 is a powerful ESD safe soldering station that delivers the heat you want to the soldering area FAST! Red ring LED in connector stays illuminated when iron is hot (Pat. pending.) Tips are ordered separately so that you can select tips to match your soldering requirements. |
| Order Code | ex GST | |
|---|---|---|
| FM202-15 Soldering Station (excludes tip) | A$ 696.00 | |
| FM2022-03 Parallel Remover | A$ 235.50 | |
| FM2023-03 Mini Parallel Remover | A$ 311.50 |
|
Available in ESD safe model. Case is dissipative black. Centigrade and Fahrenheit temperature scales. Lock screw prevents inadvertent set temperature change. Tip profiles & ordering.Flat pack removal tips.Handpiece parts ordering.Base station spare parts. |
| Order Code | ex GST | |
|---|---|---|
| 936-48 Soldering station with 907 iron (ESD safe) | A$ 125.00 |
|
Direct heating has less influence upon surrounding components on crowded boards. Easily removes SMD chips and flat pack's up to 25mm. The collet allows easy replacement and alignment of the tips. More information & tip set ordering.Supplied with a A1378 2.0mm tip set. Operates with 936-48 base (not supplied). |
| Order Code | ex GST | |
|---|---|---|
| C1311 950 SMD Hot Tweezer | A$ 175.00 | |
| C1313 Optional Iron Holder (with cleaning sponge) | A$ 50.00 | |
| A1377 Replacement Heating Element Set (25Wx2) | A$ 58.90 |
|
The all-in-one ESD safe system for soldering & desoldering. Combines a powerful desoldering tool with a high performance soldering station with accurate control for more effective repair work. Compact unit requires little bench space. Tips & handpiece parts orderingDesoldering handpiece parts ordering |
| Order Code | ex GST | |
|---|---|---|
| 701-10 Repair System | A$ 988.00 |
|
The complete ESD safe multipurpose electronic workstation. Twin independantly controlled soldering irons (900S & 907), high performance desoldering tool & hot air SMD rework tool. Order hot air nozzles here.Order soldering handpiece spares here.Order desoldering handpiece spares here.. |
| Order Code | ex GST | |
|---|---|---|
| 702B-5 Rework System | A$ 2353.00 |
|
Soldering iron tips oxidise between use, and may become blackened and unusable if kept at high temperature for a long time. The Hakko 599B has wires coated with flux, and no water is required. The tip temperature does not drop due to water during the cleaning. It is also an effective method to remove oxidisation. |
| Order Code | ex GST | |
|---|---|---|
| 599B-02 Tip Cleaner | A$ 13.50 | |
| 599-029 Replacement Cleaning Wire | A$ 7.70 |
|
Draw out the solder wire smoothly. ESD safe by design. Keep your bench neat. Up to 1kg roll bobbin. Shaft dia. 15mm. Hakko 611-1 holds 1 reel. Hakko 611-2 holds 2 reels. |
| Order Code | ex GST | |
|---|---|---|
| 611-1 Solder Stand | A$ 18.50 | |
| 611-2 2 Roll Solder Stand | A$ 30.00 |
|
Fast accurate tip temperature measurements using a fine CA wire sensor (dia. 0.2) Large easy to read temperature display (°C). Quick and easy sensor replacement. |
| Order Code | ex GST | |
|---|---|---|
| 191 | Contact Computronics for ordering | |
| 191-211 | Contact Computronics for ordering | |
|
Low-noise, high performance fan. The filter is made by combining a specific urethane foam with refined activated carbon to give high absorbency. The body is made with a non sloughing static dissipative, conductive material. A C1023 arm stand (not shown) is ideal for positioning a smoke absorber above the soldering area. |
| Order Code | ex GST | |
|---|---|---|
| 493-13 Smoke Absorber | A$ 150.00 | |
| C1023 Arm Stand for 493 | A$ 158.90 | |
| A1001 Filter Set (Pkt/5) | A$ 49.50 |
Prices do not include GST. 10% GST applies to goods delivered in Australia.
Australian GST is not paid on shipments despatched to an international destination.
Prices are in Australian Dollars and subject to change without notice.
Sales are subject to Computronics General Terms and Conditions of Sale
E. & O.E.
Due to continuing product improvement efforts, specifications and appearance are subject to change without notice.
Mains powered equipment supplied by Computronics operates from 240Vac, 50Hz supply unless otherwise specified.
To place an order, select the order quantity and click the ADD button.
Add items from other pages - if required.
When all items have been added, click a View Cart link to edit your order
and continue to the secure order page.
If ADD buttons are not visible, then Java might not be installed or enabled.
Java can be downloaded from the GET JAVA site.
Java and SSL must be enabled for the shopping cart to operate.
