MT-1010 Power Analyzer

(prices and ordering at the bottom of this page)

 

Available Parameters Harmonic Analysis up to 40th harmonic total harmonic distortion (% THD) % fundamental and degree for 1st to 40th harmonic RMS value Power Analysis total energy consumption (KWH) apparent power (KVA) real power (KW) reactive power (KVAR) true power factor displacement angle Voltage & Current frequency true RMS peak to peak, peak crest factor

Additional Features Inrush current & voltage measurements 14 bit resolution with 1W, 1mW and 1mA 0.2% basic accuracy Accepts inputs directly from Load Adaptor or shunts, CT's & VT's Standard infrared interface (RS-232C) (requires IrDa interface to PC) AC, DC, AC+DC coupling for power, voltage and current measurements Autorange measurement

Applications Measuring energy consumption of electrical appliances Measurement of maximum & minimum energy demand Harmonic analysis of power factor capacitors, variable speed motor drives and solid-state lighting ballasts Efficiency measurements Measurement of inrush current at switch on Determining power factor and PF correction requirements

 

Nowadays, many household appliances and similar electrical equipment draw current from power supply system in a very non-linear manner and therefore, inevitable introduce disturbances especially harmonics of supply frequencies into the power system to which they are connected. However, such equipment should not adversely affect the characteristics of the power supply system, the supply voltage, or the performance of any other equipment connected to the power supply system. Given that electronic devices connected to supply systems increasing, the control of harmonic emissions is an obvious requirement. Electrical engineers need not only a tester that would be able to measure, voltage, current and power but a power analyzer that can optimize the harmonic analysis as well. The MT1010 is a handheld Power Analyzer designed with powerful DSP techniques, to provide precise performance of power harmonic analysis to meet the professional needs. The need to quickly and same time accurately analyze your specific power problems and identify the problems sources is what prompted Motech Industries to introduce this new class of instruments.
	Direct Measurement Inputs
	Standard load adapter MT10A is designed to use along with MT1010 for direct measuring input current and voltage during running operations, without interrupting the current path. With this option, users can easily and safely handle the measurement of input current and voltage simultaneously.
	Low Current Measurement
	An optional load Adapter MT11A can be used with MT1010 for the measurement of low current for appliances such as Cell-Phone Charger, AC-to-DC Adapter ,UPS ,and so on. With the load Adapter, the MT1010 can measure the low current as minimal as mA level. Thus, makes it a very useful instrument applicable to variety of fields. (The LCD display readings must be converted into 3 decimal point to get the actual value of the measurement ).
	Annuciated Display
	Annuciators on the custom LCD display makes it easy for the operator to understand the reading shown by the MT1010.
	Standard Accessories
	1: MT10A Load Adaptor 2: MT10C AC current clamp 3: Test leads ZTP-101MT-1 4: Test leads ZTP-101MT-3 5: Test leads ZTP-101MT-4 6: Clamp-type clips XTB-1010B&R 7: AA-size rechargeable battery 8: Carry case ZCC-200MT-1 DC 6V power adaptor (9) not supplied due to supply variations worldwide. Other items are optional at additional cost.

Specifications

PRICES

 

MT-1010 Power Analyzer

Order Code	ex GST	View Cart
MT-1010 Power Analyzer	A$ 1470.00
MT-11A Low current load adapter	A$ 135.00