|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Site Navigation Asahi Solder DTI Hand Tools Elcontrol Electrolube Formit Hakko Kinsten Light Emitting Diodes MeanWell SMPS Module Motech Test Multicore Quick-Mark Rota-Spray Very Useful Things Clearance
|
QUICK-MARK™
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Metal or Plastic | High-Tack adhesive |
| Non-chemical processing | High Quality / Low Cost |
| Optional over-lamination | Use computer generated originals |
| Durable | Vast colour combinations |
| 1. Artwork | |
 |
Any opaque image on a translucent or transparent background will do. Laser printed images on Laserstar, or inkjet on Jetstar can produce excellent results, with high contrast to give best results. Positive or negative artwork can be used. |
| 2: UV Exposure | |
 |
The Artwork and Imaging Film are exposed together in a UV exposure unit. No dark room is required. Quick-Mark sheets are a large 305 x 508mm and can be pre-cut to the approximate size of the finished panel, label or sign. Kinsten KVB-30D UV exposure box (not shown) is suitable for image exposure. |
| 3: Peel | |
 |
The exposed Imaging Film is placed on the adhesive covered Peeling Board. Peeling boards can be re-used many times with an expected life of 1-2 years, subject to usage patterns and storage conditions. The two layers of the film are peeled apart. The top layer will be a reversal of the artwork and the bottom layer a positive duplicate. |
| 4: Laminate | |
 |
Select either piece of peeled film to laminate to the Base sheet of your choice. Using the piece of Imaging Film with the emulsion underside makes the label self laminating. Application Fluid and PA1 applicator helps with the positioning and smoothing of the film on the adhesive covered base sheet. Apply the optional Over-Laminating Film to protect or alter the gloss appearance. |
| 5: Trim | |
 |
Trim the finished Quick-Mark™ label to the required size. |
| 6: Finished ! | |
 |
The self-adhesive Quick-Mark™ panel, sign or label is now ready to fix to its final location. |
Click below for more information & ordering.
QUICK-MARK™ Imaging Film, Reversal Film & Over-Laminating Film
| Order Code | ex GST | |
|---|---|---|
| 100-062 Laserstar A4 laser print film (pk/10) | A$ 15.00 | |
| 100-070 Jetstar A4 inkjet print film (pk/10) | A$ 16.00 | |
| 800-300 Large peeling Board (305 x 508mm) | A$ 29.40 | |
| 800-301 Small Peeling Board (254 x 305mm) | A$ 21.70 | |
| 800-143 PA1 Applicator | A$ 4.90 | |
| 800-049 HB104 Pads (pk/100) | A$ 21.60 | |
| 800-308 Application Fluid (to make 1 litre) | A$ 21.60 |
Prices do not include GST. 10% GST applies to goods delivered in Australia.
Australian GST is not paid on shipments despatched to an international destination.
Prices are in Australian Dollars and subject to change without notice.
Sales are subject to Computronics General Terms and Conditions of Sale
E.& O.E.
Due to continuing product improvement efforts, specifications and appearance are subject to change without notice.
All mains powered equipment supplied by Computronics operates from 240Vac, 50Hz supply unless otherwise specified.
To place an order, select the order quantity and click the ADD button.
Add items from other pages - if required.
When all items have been added, click a View Cart link to edit your order
and continue to the secure order page.
If ADD buttons are not visible, then Java might not be installed or enabled.
Java can be downloaded from the GET JAVA site.
Java and SSL must be enabled for the shopping cart to operate.